PRODUCT DETAILS

WELLTENS PRO device is a portable and DC 3.7V battery powered multifunctional device, offering both Transcutaneous Electrical Nerve Stimulation (TENS) and Powered Muscle Stimulator (PMS) qualities in one devices.WELLTENS PRO device has 6 operation interfaces with 24 sub-modes, which can give certain electrical pulses through electrode adhesive pads to the suggested area of the body where the electrodes are placed.The electronic stimulatory module has operating elements of an ON/OFF Switch, Display screen, Mode Selection key, Intensity Modification keys, Timing key, Pause key, Shift key, Output socket, and USB port for battery charging.The display screen can show battery power, selected mode, current intensity, time remaining of an application mode, and indication of a A and B shift.The device is equipped with accessories of electrode pads, electrode cables, a battery charger, and one USB cable. The electrode cables are used to connect the pads to the device; the USB cable is used to connect the charger and the built-in lithium battery. All accessories, including USB cables, electrode pads, electrode cables, and chargers can only be changed or replaced by qualified person. The electrodes are interchangeable. The application area of the electrode pads must be larger than the smaller electrode pads.

The 24 modes are:

* 1-1 Tapping * 2-1 Acupuncture
* 1-2 Kneading * 2-2 Nudge Treatment
* 1-3 Body building * 2-3 Trigger Point
* 1-4 Knocking * 2-4 Swedish
* 3-1 Stretching * 4-1 Scrapping
* 3-2 Striking * 4-2 Butterfly
* 3-3 Gua-sha * 4-3 Shaiatsu-deep.
* 3-4 Cupping * 4-4 Thai
* 5-1 Stepping * 6-1 Tai-chi
* 5-2 Reflexology * 6-2 Rubbing
* 5-3 Sports * 6-3 Assorted treatment
* 5-4 Foot therapy * 6-4 Auto

HOW TO USE

General Operation Guidance

-> The TENS unit needs to be charged for up to 10 hours before the first use.
-> Connect the electrode cables to the output sockets at the bottom of the unit.
-> Connect the pads to the cables by snapping them on.
-> Use a damp towel to wipe the skin where you intend to put the pads, so as to remove any body oil, cosmetic or dirt. Remove the protective film and place the pads on the area making sure that both pads are on the skin and not overlapping.

Warning: To avoid an electrical short, never put two electrode pads together.
-> Turn on the unit by sliding the On/Off switch.

Warning: Do not move pads or touch them with your hands during use, it may cause strong stimulation.

-> When you have turned on the unit, the LCD display will automatically show Mode 1. The "T" (Timer) will automatically choose the time duration of 20 minutes.
-> To change the modes, press the M (Mode) button. When the A letter in the LCD flashes, increase the intensity of A channel by pressing the + button and decrease the intensity by pressing - button. If you want to adjust the intensity of B channel, press the A=B shift key, the B letter in the LCD will flash. Repeat the same as above. The +/- button could control relative intensity of two output. The chosen power output depends on your comfort level. At the precondition of acceptance, the intensity should be chosen as high as possible for the best effect but still feel comfortable.
-> To set the time of use, press the T button. The auto time set is 20 minutes. Each press of the T button increases the time by 10 minutes. After the time runs out the device turns off automatically, and it can be restarted if treatment is needed to be continued. To lock the screen, long press the T button.
-> Sit back and enjoy the deep soothing sensations!-> If you need to turn off the device during stimulation, slide the On/Off switch to "Off".
-> Before storing the TENS device, use the protective film to cover the electrode pads.